Speed Regulator
Speed Regulator
Technically part of the carburetion system the speed regulator samples outgoing air pressure and adjusts the engine speed. The diaphragm in this was shot so I had to use a piece of 3/32 neoprene to recreate a new one. This part gets mounted on the upper cowl.
Speed Regulator and Governor Linkage.
The linkage for the speed regulator is connected to a bracket on the manifold. The TM shows the linkage going parallel from the bracket to the governor and speed regulator. On the actual engine the governor is below the line of the other link and so they cross. These were not hooked up when I bought it as the speed regulator was taken apart due to a torn diaphragm. Strange, but there is no other way around this that I can see.
